Other

Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

- Add to older versions of the SuperStand to extend height to accept 29er wheels

- Clamps to the vertical tubing of SuperStands allowing for product description, pricing, specials, etc - Provides a high visibility advertising area without further shop clutter

Light-duty zip tie - 200mm length x 2.5mm - Bag of 100

Reusable zip ties - 200mm long x 7.4mm wide - 100 pieces

Wheels Manufacturing, Zip Ties, Jar of 600, Black

The Handlebar Bag Foam Spacer Kit bumps a bag 3/4" forward of your handlebars, allowing for excellent access to all your favorite resting positions on your ride. Highly recommended for use with the Zeitgeist Pack, the Catalyst Pack, the Kestrel Handlebar Bag and the Bandito Bicycle Bag. With this Handlebar Bag Foam Spacer Kit, you don’t have to forfeit access to the flats of your handlebars when you use a handlebar bag. What’s more, the Handlebar Bag Foam Spacer Kit can extend the life of your bag by eliminating abrasion from the bolts on most stems. Our Handlebar Bag features two 9" polyurethane Swift Straps. We love these amazing straps because they grip the handlebars and keep your bag in place. You can adjust the distance between your handlebar bag and your bars by adding to the stack of foam blocks. Each kit includes 6, 1/4" thick high-density foam spacers. Features: - 6 individual spacer blocks allow you to choose the optimal space for your hands - Swift Straps grip the handlebars and prevent the bag from slipping

Sunlite's Polo Seat Rail is the right part for mounting Sunlite's Polo Saddles on your favorite bike (Sunlite's Polo Saddles are sold separately and also sometimes called "banana seats"). To install, the seat's clamp fits onto the seatpost and the Seat Rail attaches to the rear wheel axle and the back of the Polo Saddle to support it. The Seat Rail has several mounting positions for getting your saddle in the most comfortable position. This sturdy-steel strut (also called a "sissy bar") boasts a beautiful polished-chrome finish to match your rig's smooth style. The 36-inch model has a built-in backrest that extends above the seat.

• Self locking rear mount design • Fully adjustable length for 26" to 29" wheels • Alloy construction

The Sitero Hook attaches to Sitero saddles, allowing bikes to be safely and securely hung in triathlon transition areas. - Replacement Hook for the Sitero

We've always had a love-hate relationship with kickstands. When they work properly, they're great-a simple and easy way to leave your bike perched. But somehow, they always seem to fail when you least expect it, ending with a loud CRASH! and a scratched-up bike. So, we decided to develop a kickstand that does its job and does it well. And keep in mind, this kickstand was specifically designed for Rolls with 650b x 2.3" tires. - Specifically designed for Specialized Roll and its 650b x 2.3" tires. - Simple mounting takes the sting out of assembly. - Balances your bike flawlessly.

2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount

With more wins than you can count with two hands, there's no denying that four-time World Champion Loic Bruni is well on his way to being one of the greatest downhill racers ever. At age 27, he's won four World Championships, seven World Cups, and over 30 top-five finishes. With all this in mind, we've designed the Butter Collection to celebrate Bruni's accolades into the 2022 season. Channel your inner Bruni with the Butter Collection. - New Era Premium knit beanie. - Fold-over cuff design. - Fabric Content: 100% Acrylic Knit.

This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm

Turbo Chainstay-Mounted Kickstand - 323mm.

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

Mate Specialized's Clip-On Clamp to a pair of aero extension bars and get time on your side. Their 22.2mm diameter is compatible with many standard aftermarket extensions, and with a one-bolt hinge system, they're simple to install.

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

Cannondale Headshok Adaptor for the SKS Shockboard Fender

Damping Rubber for U-Stay Mounting Clamp for Velo Fenders, Bluemels 75U and 75U Long, and Edge AL Fenders. - Set of 2 rubber dampers

Safety release clip for SKS bolt-on fenders with 3.4mm stays. Typically found on Chromoplastic Longboard and various OEM and Bluemel fender models.

U-Stay Mounting Clamp for Velo Fenders, Bluemels 75U and 75U Long, and Edge AL Fenders.

Frame mounting hardware for fenders—contains hardware needed to mount Chromoplastic Longboards, Bluemels and Commuter II to bicycle frame.

Rubber straps for Speedrocker, Mudrocker, and VeloFlexx. - Replacement only - Fenders include straps

Replacement sliding bridge clip for Chromoplastic Longboard and Commuter II fenders. The replacement clips are made of aluminum with an adjustable bottom so they can be clamped onto the fender. - The 35mm clip works with 35mm fenders. - The 45mm clip works with 45mm fenders. - The 55mm clip works with 50-55mm fenders. - The 65mm clip works with 65mm fenders.

Hook-and-loop straps for Speedrocker, Mudrocker, and VeloFlexx. - Fenders include straps - Replacement only

Replacement SKS Rubber Straps for RacebladePro and S-Board

U-Stay Kit for Edge AL Fenders are available as replacement sets.

U-Stay Kit for Edge AL Fenders are available as replacement sets.

8 sets of SKS Breakaway Mount Eyebolt and Nut Set

This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.

Set of 8 SKS stainless fender drawbolt/nuts

Bridge and mounting bracket for the VeloFlexx 55 and 65 Fenders

SKS Raceblade Long Hardware Kit compatible with 2014 and prior models.

Front and Rear SKS V-Brace Fender Stay Set with Drawbolts

Stay Kit for Bluemels STYLE Fenders includes 4 black powder-coated U-Stays + ESC V-Adapter Strut Mount Set (11892). Made in Germany. 11905-Set for Bluemels STYLE 46mm Width Profile (item 11832) 11909-Set for Bluemels STYLE 56mm Width Profile (item 11835) 11913-Set for Bluemels STYLE 65mm Width Profile (item 11838) 11915-Set for Bluemels STYLE 75mm Width Profile (item 11841)

Stay Kit for Bluemels 26"/28" Fenders includes 4 V-Stays with ASR Safety Release for Front + Eyebolt and Nut Set. Made in Germany. 11897-Set for Bluemels 26"/28" with Black Stays & Hardware (for 11805, 11806, 11807, 11811, 11815, 11819 and 11823) 11898-Set for Bluemels 26"/28" with Silver Stays & Hardware (for 11808, 11812, 11816, 11820 and 11824)

Attach your bike computers, lights, bells, or other bike accessories directly ahead of your ShockStop Suspension Stem. The out-front position keeps things within your line of sight and within easy reach. Benefits: - Conveniently place your component directly in front of your stem within easy reach - 4 different mounting positions let you fine-tune the fit of your bike component Details: - Fits ShockStop Suspension Stem only - 4 different mounting positions Compatibility: - 25.4 mm (1-inch) tube diameter allows flexible mounting of most components

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

Vinyl adhesive decal, perfect for tool boards, vehicles and trailers. Available in black or white. Dimensions: 36 x 4.5-inches

Made of aluminum and embossed with the “Bicycle Tools” label. Dimensions: 26.5 x 6.5-inches

Show your Park Tool pride with this full-color, embossed metal logo shop sign. • Dimensions: 508 x 299 mm (20" x 11.75")

Park's Pizza Tool is the perfect gift for the cyclist who has it all. It's a quality pizza cutter reminiscent of classic highwheelers that has a blade sharp enough to slice through the roughest terrain. This great tool also includes a display stand and gift box. Never use a run-of-the-mill pizza cutter again.

Keep your bleed kits organized and your workbench clean. The JH-4 mounts to any flat surface and securely stores and organizes your Park Tool Hydraulic Brake Bleed Kit, with purpose-designed holders for the fittings, hoses, syringes, and other accessories, plus a separate drip tray that allows hoses to drain worry-free. The JH-4 is constructed from durable powder coated steel and includes stickers for clear labeling of mineral oil or DOT fluid bleed kits. - Assembled dimensions (main assembly): 16" x 1.66" x 2.38" (406 x 42 x 60 mm) - Assembled dimensions (drip tray): 9.75" x 1.85" x 3" (248 x 47 x 76 mm) - Mounting holes spaced for 1” or 38 mm center-to-center pegboard holes - See instructions for mounting holes and recommended spacing - Mounting hardware not included

The STL-3K is kit that will add a back rest to the STL-1.2 work stool (sold separately). The STL-3K includes a back rest, two steel support bars, and fasteners. NOTE: The STL-3K will only work on the STL-1.2 work stool. The previous STL-1 work stools will not accept the STL-3K

Park's Adjustable Shop Stool is ideal for quickly maneuvering into the best position when working on your bikes. It's adjustable from 17 to 22 inches high and features 5 smooth-rolling wheels for easy scooting. You'll also love the comfy padded seat with Park's colorful logo.

Park's Shop Stool boasts a super-comfy padded seat, sturdy chrome-plated-steel legs and Park's colorful logo on top. The seat spins 360 degrees and is positioned at a height of 32 inches, which is perfect for wheel truing and all other work at a bench or counter.

Customize the decal colour of your OneUp Carbon Handlebar with this die-cut vinyl decal kit. Also includes extra decals for your bike, helmet, water bottle, truck, or dog*. Choose from 12 colours. Red, Green, Blue, Orange, Purple, White Gloss Black (looks awesome on the carbon bar) Turquoise (Yeti Turq) Oil Slick (Shiny Holographic) Silver (Matches Pike and Lyric's Polished Chrome) Gold Matte Metallic (matches Kashima and Gold Cassettes) Bronze Matte Metallic (matches Copper cassettes) *OneUp does not recommend applying decals to animals. HOW TO APPLY Step 1: Cut out the decal you want to apply from the sheet Step 2: Remove the White paper backing Step 3: Apply decal Step 4: Remove the clear transfer tape, leaving only your coloured decals

- Compatible with 70cc and 100cc pumps - Glass reinforced nylon with stretch polyurethane strap for secure rattle-free storage - Mounts to water bottle bosses

- UV stabilized stretch polyurethane strap - Securely fastens spare tube or gear to your frame - Won't absorb water and mud like a Velcro strap and won't scratch your frame

- A Threadless no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube - The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool. - Easy to install in less than 10 minutes. - Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.) The tire plug and bacon strips fit within the small storage capsule. - Chain pliers are not compatible with the threadless carrier set up. - The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and damage to your cranks - Durable, weatherproof 3M adhesive - 2-piece pack is designed to fit most cranks

The solution for protecting your disc brakes during maintenance or transit. The patent pending eye catching design makes life simple, fast and easy to use, Muc-Off's disc brake covers help to ensure you won't have protectant or lube overspray on your discs. - Sold in pairs - Protects rotors from lubricant and brake oil - Fits all MTB and road rotors - Made from breathable neoprene - Rinse and hang dry after use

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against chain slap, scratches, scuffs, stone chips, cable rub and other damage to your chainstays - Durable, weatherproof 3M adhesive - 20-piece pack is designed to fit chain stays and rear stays on most bikes

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips, cable rub and other damage to your forks - Durable, weatherproof 3M adhesive - 8-piece pack is designed to fit most front suspension forks

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and other damage to your frame, toptube, downtube, chainstays and cable rub areas - Extra wide downtube pieces to cover wider E-Bikes - Durable, weatherproof 3M adhesive - 45-piece pack will fit most E-MTB’s with wider down tubes

The Lizard Skins Patch Kits are made with high performance adhesive and will protect your frame from nicks and scratches. All patch kits come with 2 large, 4 medium and 2 small patches. - 14 mils thick for premium durability - UV resistant – won’t fade or discolor

Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.