Parts

Cork wrap is really a lot of foam with cork chunks mixed in. It's thick and softens road vibration. It can soak up moisture yet remains easy to grip. It's durable and easy to install. It holds color well and doesn't fade. You can wash it like you wash the car; soapy rag, scrub, rinse, repeat.

- Allows the use of two separate cables running from detangler to brake for more precise adjustment and better feel - Attaches to rear cable guide and routes two cables around seat post

- Kevlar reinforced compound increases pad friction and performance - Ceramic injected pad for increased friction in wet conditions - Red and yellow copper material added for low and high speed performance changes - Improved heat dissipation through back plate grooves - 35-45% increase in durability compared to standard sintered pad Compatibility: Avid Juicy 3, 5, 7, Ultimate & BB7

Compatibility: Promax DSK320, DSK400, DSK610J, DSK50J, DSK700, XNine

Compatibility: Avid BB5 / Box Three / Promax DSK-300

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

These replacement brake pads are designed specifically for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Carbon fiber rim construction and design are only part of the solution to solving the heat equation. Brake pads play an integral role in ride performance and long-term durability of the wheel.

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

- Weight: 160g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap

MKS Esprit Pedals. - Light alloy body and cage - Accepts toe clips

Designed with the rider in mind, the ADVENT rear derailleur packs trail-ready features into an attainable wide-range drivetrain system. The derailleur kinematics are precisely tuned to use a more direct cable path, making the shifting feel consistent across the lowest and highest gears, and everything in between. - Clutch provides stronger chain management over rough terrain - Ratchet-and-pawl clutch is easily adjustable and repairable - Direct cable routing for smooth, responsive shifting - Compatible with 11-42T 9-speed cassettes - Compatible with ADVENT shifters only

- Made of TPR - Single-ply, full-flange - Black push-in plugs included - Grip Length: 143mm - Handlebar Diameter: 22.2mm

Origin-8's Braze-On Cable Stop with adjuster allows you to convert to STI style shifters. They mount onto down tube Braze-on bosses and are machined alloy with an anodized finish. The lightweight design lets you make the conversion without adding too much extra weight. One pair per package.

The Problem Solvers Travel Agent amplifies your braking power so that you can mix road, mountain and cyclocross brakes and brake levers. Instead of buying new levers or brakes, just install a Travel Agent and you're good to go. This trick gizmo is made of quality 6061 aluminum and is available with and without a built-in adjustment barrel. It works with cantilever brakes, road dropped handlebars, and Shimano STI and Campagnolo Ergopower levers.

Get more distance out of every pedal stroke with SRAM's BB30 Bottom Bracket Assembly. It features sealed bearings for a smooth pedal stroke and impressive reliability. Plus, it presses directly into your frame's BB30 bottom bracket shell for reduced weight and increased longevity.

The GX Eagle Transmission (T-Type) Cassette is a key reason why Eagle Transmission offers the best-ever inboard and outboard shifting performance under load. Thanks to its full X-SYNC design, the harder you pedal, the better it shifts. Designed for a 55mm chainline for less extreme chain angles throughout the full range and delivers more precision. It's 520% range has been optimized with larger 38 and 44-teeth cogs prior to the 52-tooth cog for improved gear steps in the low end (compared to the Eagle drivetrain 10-52-tooth cassette). Featuring a clearly marked Setup Cog, install is both simple and foolproof. Plus, it utilizes a Pindome design for gears 1-8 and a single piece mini-cluster for gears 9-12. - 520% range. Full X-SYNC for best-ever inboard and outboard shifting performance under load. Optimized gear steps on low end. - 55mm chainline compatibility for more moderate chain angle, longer wear and greater precision. Setup Cog for simple set up. - Features a combination Pindome and MINI-CLUSTER design

SRAM's PC 830 Chain offers accurate shifting, excellent durability, and superior power transfer for 8-speed drivetrains.

Hose fittings fit many of SRAM's newest hydraulic brake models. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

SRAM's X4 Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum and steel construction delivers through the roughest trail, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.

Tucked neatly beneath your handlebars, the XX1 Eagle X-ACTUATION trigger shifter is the nerve center of the Eagle drivetrain. Its internal works have been updated to include a 12th gear, and improved to enhance trigger feel, precision and durability. Whether you’re 3 laps into your race or 150 days into your season, the XX1 Eagle trigger shifter is your faithful 1x touch point.

We wanted to make Kyle the grip of his dreams sparing no expense in modern science. By combining our thinnest interior sleeve with an oversized diameter, we achieved a grip that not only dampens small bumps but provides superior grip. Using the softest rubber ever used by our American factory has allowed for supple grips, while maintaining a quality that outlasts the competition. With a need for oversized grips in every discipline, from XC Foamiez, to DH Double-Wrapped, this was a no brainer. - Oversized 5” (134mm) Grip Area - Oversized 6” (151mm) Overall Length - Oversized 1.35” (35mm) Diameter - Semi Flange with Pinky Ramp - Single Lock - Integrated End Cap - Hand Crafted in California

- Upper pulley has larger teeth for increased chain control

- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack

The Shimano Altus rear derailleur brings Shadow technology and wide-range capability to 9-speed drivetrains - B tension spring for quick and easy wheel installation and removal - Super low-profile concept with SHADOW mechanism - Wider linkage ensures durability and more precise shifting - Easy adjustment and maintenance - Direct mount compatible - Maximum cog size: 36t - Total capacity: 45t

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition. - Pair the 38T outer chainring with 24T inner chainring for optimal shifting performance

Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.

Shimano Tiagra CN-4601 10-Speed Chains - For Ultegra 6703 and 105 5703 triple drivetrains, please see 10-Speed Hyperglide non-directional chains - Hyperglide 10-Speed chain - Not compatible with Shimano 10-Speed Dyna-sys mountain bike drivetrains - Directional inner and outer plates designed for better contact with gear teeth allow smooth shifting even under high load conditions - Chromized rivet pins improve wear resistance - Perforated plates for reduced weight - 116 links

The Shimano Tiagra ST-4725 Dual Control Levers bring the all-conditions confidence of hydraulic disc brakes and refined ergonomics to the quick and intuitive shifting cyclists expect from Shimano Tiagra. - Dedicated lever for riders with smaller hands with smaller lever size and new positioning for improved ergonomics - Smooth and effortless operation - Redesigned internal shifting unit - Greater confidence and control for riders with smaller hands in all conditions - Quick and intuitive rear shifting operation - Same level of shifting operation as high-end road groupsets

Shimano Tiagra BR-4770 hydraulic disc brake calipers offer greater rider control in all conditions. With convenient One Way Bleeding and easy hose joint system, installation and adjustment are simple.

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t

The uninterrupted shifting experience of the Shimano Ultegra CS-R8100 12-speed cassette range lets you climb, sprint, or cruise without stopping to think about your next gear change. Larger driving cogs maximize drivetrain efficiency and create compatibility with both Shimano 11 and 12-speed freehub bodies. Shimano HYPERGLIDE+ technology is integrated to provide seamless shifts both up and down the gear range. - Refined 12 step gear combination provides peak efficiency and accelerating performance for every racing situation - Faster, smoother shifts under maximum pedaling force - Compatible with 12-speed and road 11-speed freehub body

The Specialized Alloy Mini Rise Handlebar is ideal for XC and All Mountain riding. - Width: 750mm, 780mm

The S-Works Venge stem has been designed to work as a system with the Venge cockpit to optimize aerodynamics, stiffness, and weight. - Seamless integration with the 2019 Venge frame and hidden cables - Optimized for use with the S-Works Aerofly II handlebars for integration - Its dropped clamp and flat upper profile cheat the wind for the maximum aero advantage - Extremely stiff for responsive handling and out of the saddle sprinting

- 7-speed SIS compatible Freewheel

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Alloy 135mm V-brakes for front or rear applications - Linear pull, front or rear compatibility - Dual spring tension adjustment

• Steel • Retainer ball bearings, includes top cap and star nut • 1 inch • S.H.I.S.: EC30/25.4, EC30/26

- Standard steel replacement

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

Lyra Cross Rotor

Wellgo Clipless Cleats for SPD Style pedals. - Four degrees of float - Includes four cleat mounting bolts, two cleat washers, and two cleats - 98A cleat is Shimano SH51 compatible - Not fully compatible with pedal types that use Shimano multi-release cleats - Packed in bag, not for retail display

Silver aluminum headset spacers for 1-1/8" fork steerer. 10mm thick. Inner Diameter: 28.9mm Outer Diameter: 34.4mm Thickness: 10mm Precision-machined aluminum Polished aluminum Bag of 5 spacers

Silver aluminum headset spacer for 1-1/8" fork steerer. 15mm thick. Inner Diameter: 28.9mm Outer Diameter: 34.4mm Thickness: 15mm Precision-machined aluminum Polished aluminum Sold Individually

Black aluminum headset spacer for 1-1/8" fork steerer. 20mm thick. Inner Diameter: 28.9mm Outer Diameter: 34.4mm Thickness: 20mm Precision-machined aluminum Anodized black Sold Individually

Silver aluminum headset spacer for 1-1/8" fork steerer. 20mm thick. Inner Diameter: 28.9mm Outer Diameter: 34.4mm Thickness: 20mm Precision-machined aluminum Polished aluminum Sold Individually

Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

Grade 300 retainer bearings for headset and bottom bracket service 5/16" ball diameter 12 balls per retainer Grade 300 Bearings 10 Retainers/Bag

The Wheels Manufacturing 3.5mm Spacer Kit for 61mm Specialized OS Carbon Frame widens 61mm wide Specialized Carbon OSBB frame BB shells for use with Pressfit 30 bottom brackets. Place one 3.5mm BB cup spacer between each bottom bracket cup and the frame when installing the bottom bracket. Additional crank spindle spacers are included to fine-tune any crankset fitment play, and these spacers are machined from engineering-grade Delrin. Includes: - (2) - 3.5mm bottom bracket cup spacers (46mm ID) - (4) - .5mm crank spindle spacers (24mm ID) - (2) - 1.0mm crank spindle spacers (24mm ID)

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

RaceFace Crank Arm Fixing Bolts - M15

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only