Electronics

NEVER MISS A BEAT Whether you’re training indoors or out, the HRM-Pro Plus heart rate monitor provides the accurate data you need to push limits and reach goals. - HRM-Pro Plus transmits real-time heart rate and heart rate variability data to compatible devices, equipment, and apps. - Get a tool-free battery door and up to 1 year of battery life. - No, it’s not just a heart rate monitor. Running dynamics also help you improve your form (requires a compatible Garmin smartwatch). - Connect to your compatible Garmin smartwatch, and get pace and distance data for your indoor runs. - Not wearing your watch? HRM-Pro Plus captures steps, calories burned, intensity minutes, and more.

- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB

Wheel magnet for all CatEye cycle computers

Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g

The H-34 Flex-Tight Bracket is an OEM handlebar bracket so you can attach Cateye accessories. It fits all handlebars up to 32mm in diameter.

Cadence Magnet for all CatEye computers that record cadence.

Handlebar and Stem Bracket Band and Bracket for your Strada Wireless, Strada Double Wireless, Urban Wireless, Micro Wireless, Commuter, and Adventure. The FlexTight Kit Wireless system is the full kit for your CatEye wireless computer mounting needs.

Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Rubber Inserts for COMPIT Bar Clamp are replacement inserts in case they are needed.

Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.

Hand tight adjustability and 4mm hex wrench lockable. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Combo Mounts, Light&Camera Mounts. - Aluminum knurled thumbscrew - Stainless Steel bolt with 4MM hex feature - Weight: 10g - Anodized Color: Black - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded

Take full advantage of the comprehensive ride data that your Garmin watch provides with only a split-second glance. - Fits 31.8, 25.4 & 22.2mm handlebars - Compatible with a wide range of watches

Garmin's Bicycle Mount Kit lets you attach any compatible Garmin to your bike's handlebars, so the data stays out in front where you can see it.

With this adaptor piece, you are able to easily convert any Garmin quarter turn bike computer mount to a Wahoo bike computer mount.

CatEye's Out Front Bracket frees up your handlebars and positions your favorite CatEye computer just in front of your stem for optimal viewing and accessibility.

Mounting for Shimano Di2

COMPIT Cable for Ebike Power Supply attaches the Com+ battery/recharger unit to ebike computers with a power output (such as Bosch Intuvia) so the Com+ can be charged from the E-bike power source. - Will not charge phone directly from E-bike battery; Com+ unit is also necessary

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Compatible with some saddle bags - Mounts to saddle rails

THIRST QUENCHER WITH THE BEST ATTITUDE GRADES Bottle holder with adapter for the handlebar What to do with the bike bottle if the bike frame - especially on e-bikes - doesn't have room for a cup holder? The bottle holder system COM/CAGE VELO guarantees an ideal solution for the cockpit. Especially on the handlebars, the bicycle bottle is easily accessible at all times and can be easily removed and reinserted for drinking. Compatible with the COMPIT system The system consists of an adapter and the proven SKS bottle cage VELOCAGE. It is compatible with the smartphone holders COMPIT (item no. 11533, 11534, and 11798) and COMPIT/E (item no. 11535, 11536, and 11799), but can also be used without a mobile phone holder. In this case, the attachment for mounting on e-bikes with a Bosch Intuvia display is included in the scope of delivery. - Compatible with the COMPIT system - Including adapter for attachment to the handlebar - Made in Germany - Weight: 62g

MOBILE PHONE CASE WITH FASTENING DEVICE Mobile phone case with a fastening device In order to securely attach the smartphone to the COMPIT or the +COM/UNIT, it must be equipped with a suitable COMPIT COVER. The mobile phone case with a special fastening device allows the smartphone to be docked to the system by attaching and rotating it via the oversize bayonet mount. Made of a shock-absorbing 2-component plastic The cover's shock-absorbing materials wrap around the outer edges of the smartphone and protect it in the event of an impact. The cover is particularly robust in heavily used areas thanks to the use of high-quality, wear-resistant plastic. The 2-component case with a pleasant feel can be easily attached to and removed from the mobile phone. Including a practical hand strap. - Made of a wear-resistant 2-component plastic - With fastening device - Shock absorbing - Pleasant feel - Including practical hand strap

MORE POWER, WITH SECURITY, MORE COMFORT Mobile phone case with a fastening device In order to securely attach the smartphone to the COMPIT or the +COM/UNIT, it must be equipped with a suitable COMPIT COVER. The mobile phone case with a special fastening device allows the smartphone to be docked to the system by attaching and rotating it via the oversize bayonet mount. Made of a shock-absorbing 2-component plastic The cover's shock-absorbing materials wrap around the outer edges of the smartphone and protect it in the event of an impact. The cover is particularly robust in heavily used areas thanks to the use of high-quality, wear-resistant plastic. The 2-component case with a pleasant feel can be easily attached to and removed from the mobile phone. Including a practical hand strap. - Made of a wear-resistant 2-component plastic - With fastening device - Shock absorbing - Pleasant feel - Including practical hand strap

MORE POWER, WITH SECURITY, MORE COMFORT Mobile phone case with a fastening device In order to securely attach the smartphone to the COMPIT or the +COM/UNIT, it must be equipped with a suitable COMPIT COVER. The mobile phone case with a special fastening device allows the smartphone to be docked to the system by attaching and rotating it via the oversize bayonet mount. Made of a shock-absorbing 2-component plastic The cover's shock-absorbing materials wrap around the outer edges of the smartphone and protect it in the event of an impact. The cover is particularly robust in heavily used areas thanks to the use of high-quality, wear-resistant plastic. The 2-component case with a pleasant feel can be easily attached to and removed from the mobile phone. Including a practical hand strap. - Made of a wear-resistant 2-component plastic - With fastening device - Shock absorbing - Pleasant feel - Including practical hand strap

MORE POWER, WITH SECURITY, MORE COMFORT Mobile phone case with a fastening device In order to securely attach the smartphone to the COMPIT or the +COM/UNIT, it must be equipped with a suitable COMPIT COVER. The mobile phone case with a special fastening device allows the smartphone to be docked to the system by attaching and rotating it via the oversize bayonet mount. Made of a shock-absorbing 2-component plastic The cover's shock-absorbing materials wrap around the outer edges of the smartphone and protect it in the event of an impact. The cover is particularly robust in heavily used areas thanks to the use of high-quality, wear-resistant plastic. The 2-component case with a pleasant feel can be easily attached to and removed from the mobile phone. Including a practical hand strap. - Made of a wear-resistant 2-component plastic - With fastening device - Shock absorbing - Pleasant feel - Including practical hand strap

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For Samsung S10 phone

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For Samsung S7 phone

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For Samsung S8 phone

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For Samsung S9 phone

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 11 Pro

MORE POWER, WITH SECURITY, MORE COMFORT Mobile phone case with a fastening device In order to securely attach the smartphone to the COMPIT or the +COM/UNIT, it must be equipped with a suitable COMPIT COVER. The mobile phone case with a special fastening device allows the smartphone to be docked to the system by attaching and rotating it via the oversize bayonet mount. Made of a shock-absorbing 2-component plastic The cover's shock-absorbing materials wrap around the outer edges of the smartphone and protect it in the event of an impact. The cover is particularly robust in heavily used areas thanks to the use of high-quality, wear-resistant plastic. The 2-component case with a pleasant feel can be easily attached to and removed from the mobile phone. Including a practical hand strap. - Made of a wear-resistant 2-component plastic - With fastening device - Shock absorbing - Pleasant feel - Including practical hand strap

MORE POWER, WITH SECURITY, MORE COMFORT Mobile phone case with a fastening device In order to securely attach the smartphone to the COMPIT or the +COM/UNIT, it must be equipped with a suitable COMPIT COVER. The mobile phone case with a special fastening device allows the smartphone to be docked to the system by attaching and rotating it via the oversize bayonet mount. Made of a shock-absorbing 2-component plastic The cover's shock-absorbing materials wrap around the outer edges of the smartphone and protect it in the event of an impact. The cover is particularly robust in heavily used areas thanks to the use of high-quality, wear-resistant plastic. The 2-component case with a pleasant feel can be easily attached to and removed from the mobile phone. Including a practical hand strap. - Made of a wear-resistant 2-component plastic - With fastening device - Shock absorbing - Pleasant feel - Including practical hand strap

MORE POWER, WITH SECURITY, MORE COMFORT Mobile phone case with a fastening device In order to securely attach the smartphone to the COMPIT or the +COM/UNIT, it must be equipped with a suitable COMPIT COVER. The mobile phone case with a special fastening device allows the smartphone to be docked to the system by attaching and rotating it via the oversize bayonet mount. Made of a shock-absorbing 2-component plastic The cover's shock-absorbing materials wrap around the outer edges of the smartphone and protect it in the event of an impact. The cover is particularly robust in heavily used areas thanks to high-quality, wear-resistant plastic. The 2-component case with a pleasant feel can be easily attached to and removed from the mobile phone. Including a practical hand strap. - Made of a wear-resistant 2-component plastic - With fastening device - Shock absorbing - Pleasant feel - Including practical hand strap

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6+/7+/8+

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone 6/7/8

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone X/XS

COMPIT Phone Covers (or the COMPIT Phone Adapter) are needed to securely mount the phone to the COMPIT unit. The cover has a special mounting device that allows the phone to be docked into the COMPIT system. Enclosing the outer edges of the phone and extra-durable at the points of maximum stress, this cover is made of shock-absorbing, high-quality, wear-resistant plastic. It can be easily attached and removed from the phone. - For iPhone XR/11

COMPIT Universal-Cover Adapter (or COMPIT Phone Covers) are needed to securely mount the phone to the COMPIT unit. The adapter with the special mounting device allows the phone to be docked into the COMPIT system. The cover attaches to the user's favorite phone case with self-adhesive 3M film.

Silicone Case for Edge 540/840

Protect your Edge 1030 with this form-fitting, removable silicone case.

- Replacement bike mounts and other accessories for your Garmin products

- Replacement bike mounts and other accessories for your Garmin products

- Replacement bike mounts and other accessories for your Garmin products

Protective Silicone case for Edge 1040 and 1040 Solar

Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to the seat post of a second bike with this quarter-turn mount. Includes mount and 2 fitting shims.

Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to an aero or round seat post with this quarter-turn mount. Includes mount, 2 fitting shims and 4 O-rings.

Constructed from a high quality proprietary polymer blend that is super durable. - Securely locks and perfectly positions your computer - Fits 31.8, 25.4 & 22.2mm handlebars - Simple one-bolt design makes installation a breeze - Compatible with Garmin Edge 20, 25, 130, 510, 520, 530, 810, 820, 830 & various other cycling computers - Not compatible with Edge 1000 series

Constructed from a high quality proprietary polymer blend that is super durable. - Securely locks and perfectly positions your computer - Fits 31.8, 25.4 & 22.2mm handlebars - Simple one-bolt design makes installation a breeze - Compatible with Wahoo Elemnt, Elemnt Mini, Elemnt Bolt and Elemnt Roam - Also compatible with Pioneer computers

- Machined protective case that houses the Apple AirTag on the bottle cage mount. Apple Air Tag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Removal key for T25 bolts security bolts included - Fits discreetly under a water bottle cage or mounted to accessory top tube bolts

- Discreet way to install an Apple AirTag inside your tubeless tire - Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval - AirTag is housed in a 3-part silicone and rubber tubeless valve mount - Sacrificial stem, ensures tracker and rim protection under impact - Silicone top cover protects tracker and internal plug reduces sealant ingress - Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal - Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types: - MTB tyres (XC, Enduro Trail, Downhill) - Gravel Tires (the narrowest recommended tyre size is 38mm wide)

This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams

Type C Charging Cable for COMPIT (Android) can be used to charge phone with the COMPIT Com+ Recharging Battery if the user's phone is not NFC-wireless compatible.

The iPhone Charging Cable for COMPIT can be used to charge iPhone with the COMPIT Com+ Recharging Battery if the user's phone is not NFC-wireless compatible.

Free up bar space and secure your GoPro and many other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated. - Compatible with Ritchey C220 and 4-Axis 44 stem faceplates - Forged and machined alloy - Includes extended-length hardware

External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.

SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.

Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.